background image

 

 

 
 
 

    1.   UNPACKING YOUR LOUDSPEAKERS 

 

NOTE: 

When  lifting  the  loudspeakers  out  of  the  packing,  hold  them  by  the 
upper or lower plates.  Do not lift them by the DDD support pillars (see 
figure 2) as this may damage the driver. 

 
 

The DDD drivers may be protected with clear film or cardboard covers.  
We recommend that these be left in place until the loudspeakers have 
been  placed  in  their  final  location,  so  as  to  guard  against  accidental 
damage during handling. 

 
The  two  loudspeakers  are  packed  in  one  carton.    Before  opening  the  carton,  please  inspect  it  for 
damage.  If  you see any damage to the carton,  please contact the supplying  audio dealer immediately 
and provide them with a full description of the damage.  Do not attempt to unpack the loudspeakers until 
you have spoken with the dealer and have been advised how to proceed. 
 
Please  retain  all  of  the  packing  as  you  will  need  this  should  it  be  necessary  in  the  future  to  ship  the 
loudspeakers.    The  use  of  any  other  packing  may  result  in  the  loudspeakers  sustaining  damage  in 
transit.  Such damage is not covered by the warranty.  Should you require replacement packing, please 
contact your German Physiks dealer, the national distributor or the factory directly. 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
To unpack the loudspeakers please follow the instructions below: 
 
1.  Unscrew and remove the two screw caps on each side of the carton top cover  – item A in figure 1. 
 
2.  Remove the carton top cover by carefully pulling it over the four screws. 
 
3.  Remove the foam packing piece from the top of the main body of the carton - item B in figure 1. 
 
4. Unscrew and remove the two screw caps on each side of the carton lower tray  – item C in figure 1. 
 
5.  Lift off the main body of the carton – item B in figure 1. This may be folded flat for easy storage. 
 
6.  Lift the loudspeakers off the lower packing tray by holding them around the cabinets or top plates.  Do 
not lift the loudspeakers by the DDD driver support pillars. 
 
7.  Remove any clear film from around the loudspeakers taking care not to scratch the finish. Do 

not

 use 

a knife. 

 Figure 1.  PQS-201 Mk II Shipping Carton 

Отзывы: