Gericom Q10 Air, Руководство пользователя

Страница: 30 / 62

ENGLISH Q10 Air
26
There is a small built-in battery pack that supplies power to the
system in order to maintain certain system information while the
power is off.
If the notebook is left without a power source for long period of
time, this battery will be exhausted and system information will
be lost.
WARNING: Danger of explosion exists if battery is incorrectly replaced. Replace only with the same
or equivalent type recommended by the manufacturer.
Dispose of used batteries according to the manufacturer's instructions. Never remove the battery
pack while the power is on as this may result in data loss when the system loses power.
Resetting the system
After installing a software application package, you may be
prompted to reset the system to load the changed operating
environment.
To reset the system, or
reboot
, press the
[Ctrl]+[Alt]+[Delete]
keys simultaneously. This is known as warm boot . This key
combination acts as
software
reset switch when you encounter
hardware or software problems, which lock up the notebook.
If this key combination does not shut down the notebook, you
can
reset the notebook by using the notebook’s power button.
Should the notebook lock up for some reason, pressing this
button powers the notebook off.
Adjusting the brightness
To adjust the brightness on the LCD screen, press and hold down
the
[Fn]
key in the lower left hand corner of the keyboard and
press the [F8] key to reduce the brightness or [F7] to increase the
brightness.