Gerber ADVANTAGE ROUTER 600, Руководство пользователя, Страница: 104 / 114

96 ADVANTAGE Router
Establish Start Location
3. Slew the machine all the way to the left front.
4. Position the tool so there is a .200 inch (5 mm) overlap
extending beyond both edges of the corner on the left front slat
as shown in the diagram.
Set Up Job
5. At the GRAPHIX ADVANTAGE, select the output device
GAGR3MILL-1 in the Router Select option in Art Path.
6. Open a file called AR600MIL.RTP. If cutlines appear, select
the output device again.
Note: A plot file called AR600MIL.RTP in Art Path is available
if changes to the size of the table are necessary.
7. Double-click on AR600MIL.RTP. The Current Engraving Info
Dialog Box appears.
8. Set the Total Depth to the amount of surface to be removed
(depending on the roughness of the table surface).
9. Click on Generate.
10. Click on Output.
11. Click on Rout in the Job Output Dialog Box.
12. After the data is received at the console, the system beeps.
13. Press START to run the job.