background image

29

GB

Precautionary measures

 •  Measuring too frequently may result in circulatory dis-

orders, which can cause unpleasant sensations such 
as localised bleeding under the skin or temporary 

numbness in your arm. These symptoms do not usu-

ally last long. However, if you have not recovered after 
some time, please consult your doctor.

 • Please take into consideration the electromagnetic 

compatibility of the unit (e.g. disruptions to the power 
supply, radio frequency interference, etc.) see annex. 

Please only use the unit indoors. To avoid inaccurate 
results due to electromagnetic interference between 

electrical and electronic equipment, please do not use 

the unit near mobile phones or microwave ovens. In 
the case of devices whose maximum power exceeds 
2 W, the minimum distance from your blood pressure 
monitor should be 3.3 metres.

 •  The unit is not waterproof. Never immerse this instru-

ment in any liquids.

 •  Do not use the instrument if you think it is damaged or 

if you notice anything unusual.

Warranty

The warranty for this blood pressure monitor is valid for 

any error on the part of the manufacturer under normal 
use for 3 years from the date of purchase. If your unit 
does not function properly due to defective parts or as-
sembly, we will repair it free of charge. 

With the exception of the battery and cuff, all parts of the 
unit are subject to this warranty. Damage caused by im-
proper handling of your unit is not guaranteed. 
We recommend that the accuracy of the unit be checked 

after 2 years from manufacturing date by an authorized 

laboratory.

This checking procedure is not a service provided under 

the warranty.

Содержание GT-868UF






















Отзывы: