Instructions for Use
Diffustik / Variant PFTstik
Serial no.: xx|8|401|yyy and 2401xxxxx
Version: 8 | Release date: 16. August 2021
Page 81
9.2.4
Shutter System
9.2.4.1
Shutter-Cage or Shutter Block
1.
Disassemble the shutter system
For this:
Procced in reverse order as
described in chap. 6.2.2 ”Assembly
Shutter System“
2.
a) Until product. 11 / 2018:
disconnect the shutter block [1]
from the shutter drive [2] by turning
it counterclockwise.
Also separate the shutter block [1]
from the shutter plug [3] by screwing
and pulling it out.
b) Until product. 11 / 2018:
disconnect the shutter cage [4]
from the shutter drive [2]
by turning it counterclockwise.
3.
Remove visible dirt with a soft cloth
4.
Put the components [1] + [3] or [4]
+ [5] in disinfectant fluid.
5.
Wash the components [1] + [3] or
[4] + [5] thoroughly in distilled water
so that no residues of contamination
and disinfectants remain.
6.
Components [1] + [3] or [4] + [5] air
dry until no more moisture is visible
4
2
5
4
1
2
3
