GERATEK Victoria GT1200W, Руководство пользователя

Страница: 8 / 76

- 7 -

Avoid the installation:
-
near heaters, next to a stove, direct sunlight or any other heat sources;
- at locations with high humidity (e.g. outdoors, bathroom), as metal parts would be susceptible to
corrosion under such circumstances;
- near volatile or flammable materials (e.g. gas, fuel, alcohol, paint, etc.), in rooms which may have poor
air circulation (e.g. garages).
- Do not expose the appliance to any weather.
Electrical connection
Warning:

The installation to the mains supply must conform to the local standards and regulations.

Improper connection may cause to an electric shock!

Do not modify the appliance plug. If the plug does not fit properly to the outlet, let install a proper outlet
by an authorized specialist.

The accessibility of the power plug must be ensured to disconnect the appliance from the power supply in
case of emergency.

Make sure that the voltage supply matches the specifications on the rating label before connecting.

Connect the mains cable to a properly installed and earthed wall outlet.

If the plug after installation is not accessible, a corresponding disconnect device must be available to meet
the relevant safety regulations.
STARTUP / OPERATION
Prior to first use
Caution:
After transport, the appliance should be left standing upright for four hours before connecting to the power
supply. Nonobservance could lead to malfunction of the cooling system and causes an appliance break-down.
Clean the appliance interior including all accessory parts. Consider the instructions which we provide in the
chapter
“ Cleaning and Maintenance ” .
Starting the appliance
Connect the appliance to the power supply; the control lamp illuminates.
Operate the temperature control with the help of the included plastic plate. See also the section "Settings".
Settings
As soon as the appliance is connected to the power supply, the control lamp lights up.
Setting [ 0 ] means that the appliance is in the off state. Turn the temperature control clockwise, starting from
this setting; the appliance will turn on automatically.
The power levels [ 1
– 7 ] regulate the different values of the internal temperature.
Power level 1: Temperature range approx. -8°C
∼
-12°C
Power level 2 - 3: Temperature range approx. -12°C
∼
-15°C
Power level 4: Temperature range approx. -15°C ∼ -18°C
Power level 5 - 6: Temperature range approx. -18°C
∼
-20°C
Power level 7: Temperature range approx. -20°C ∼ -25°C
Beware, the compressor won’t stop and works all the time.
Basically, the temperature will change depending on the ambient temperature, frequency of lid opening and the
amount of food in the appliance.