GEPRC SMART16, Руководство пользователя и инструкция по установке

Страница: 7 / 18

7 / 18
Bind AC900 Receiver:
Before binding, update the firmware of the built-in module of the remote control to v1.1.3
(the built-in module firmware version of the remote controller needs to match with the
receiver's firmware version, otherwise the receiver cannot be bound).
1. Turn on the receiver while holding the bind button on the receiver, release the button
and wait for the
green light flash.
2.
For Taranis X9D/X9D Plus/X9E and Taranis QX7, turn on the transmitter, go to the MENU
– MODEL SETUP – PAGE 2, choose Internal RF, and select BIND.
3.
When the green light is on, it indicates that the binding is successful. Turn off the receiver,
and then turn on the receiver. The green light on the receiver must be on, indicating that the
link is normal.
1
2
3
Binding Button
Binding
Binding Successful