Function
4 plugs for video inputs.
A plug for the speaker device.
Each plug is for 2 audio inputs.
It resets all configurations to their factory
settings. See
7 Restoring to Default Settings
in
the
Quick Start Guide
.
This LED is on, indicating the hard drive is full
or faulty.
This LED is on, indicating the GV-Video Server
is ready for connection.
This LED is on, indicating the power is
supplied.
It reboots the GV-Video Server, and keeps all
current configurations.
2 USB ports for installing portable storage
devices.
The connectors for digital input, relay output,
PTZ camera, Wiegand device and GPS module
control.
A plug for a 10/100 Ethernet or PoE.
Note:
GV-VS14 does not support PoE function.
A plug to power on the camera, by using a DC
Male-to-Male Cable, directly through the
GV-Video Server.
Note:
When PoE is applied, you cannot power
on the camera through the GV-Video Server.
A plug to power on the GV-Video Server.
Name
Video Input
Speaker Output
Audio Input
Default Button
Disk Full/Fault LED
Ready LED
Power LED
Reset
USB Port
Terminal Block
Ethernet Port
Power Out
Power In
No.
1
2
3
4
5
6
7
8
9
10
11
12
13
