CMS Configurations
144
9
To define how the videos from the camera are displayed upon motion detection and
input trigger click
Preference Settings
and select
System Configure
. This dialog box
appears.
Figure 9-3
Manual close channel:
Closes the triggered camera view manually.
Close the camera view when motion stopped:
Closes the triggered camera
view automatically when the motion stops.
Post Motion:
Specify the duration of the camera view remaining on the
monitoring window after motion stops.
Camera send by I/O trigger will monitor:
Specify the duration of the camera
view remaining on the monitoring window upon triggering of I/O devices.
To keep the camera view remaining on the monitoring window even after the
end of the alarm event, click the right-arrow button
and uncheck
Latch
Trigger
. The dome view will remain on the monitoring window for the
specified time, e.g. the event is displayed for the total of 15 minutes if the
alarm event is 5 minutes and the time specified is 10 minutes
Note:
For further information on how to manage the received video from the GV-IP Speed
Dome, see
GV-CMS Series User’s manual
.
