December 13, 2017
4
Loading Default Setting
You can load the default value with the
Reset
button or with the Web interface.
Hardware
1. Turn on the switch.
2. Press and hold the
Reset
button on the front panel of the switch for 5 seconds until all
the LED start blinking.
3. Release the button. The switch is restored to its default settings.
Note:
After restoring default settings, you will need to configure IP address, ID and
Password again.
Web Interface
1. On the Web interface, select
Factory Default
. This page appears.
2. Click
Yes
to restore the switch to the original configuration.
Note:
Loading default from the Web interface will not change the user name, password
and IP configuration. If you want to restore the default setting of IP address, user name
and password, press the
Reset
button on the front panel of the switch.
