1. Select the icon, select
LAN
Setting
and press
OK
.
2. Select
NO
in the DHCP section
and enter a fixed IP address,
subnet mask and DNS and
gateway.
3. Press
OK
to save the settings.
When the device is connected to
the Internet, the IP address will
be shown in the
Connected IP
field.
4
Configuring the Basics
After you have installed and connected the necessary cables, you are ready
to configure the IP address, ID and password. The default IP address, ID
and password of GV-IP Decoder Box / GV-Pad are as below:
Wired Network Connection
If you have connected your device for a wired network connection, by
default, the device will be
automatically assigned an IP address
by the
DHCP server without further settings. To change the IP address to a fixed
one, follow the steps below.
Wireless Network Connection
A GV-WiFi USB Dongle is required to connect the device to wireless
network. Follow the steps below to establish a wireless network
connection.
Note:
The GV-IP Decoder Box / GV-Pad only supports dynamic IP
address assignment (DHCP) in a wireless network.
1. Select the icon, select
WLAN Setting
and press
OK
.
2. Press the
Search
button to scan
for available Access Points /
wireless stations.
3. Select an Access Point / wireless
station in the
ESSID
field and
complete the settings below.
4. Press
OK
to save the settings and connect to wireless LAN. When the
device is connected to the Internet, the IP address will be shown in
the
Connected IP
field.
●
ESSID
: Shows the name of the Access Point. Press the left and
right button to select an Access Point.
●
Quality
: Shows the connection quality on a scale of 1 to 100 with
100 being the highest quality.
●
AuthMode
: Select WEP Auto or WPAPSK according to the
encryption setting of the Access Point.
●
EncryMode
: Select the Encryption Mode according to the
encryption setting of the Access Point.
●
Password
: Type a password to match the Access Point. You can
type up to 26 characters.
Default Settings
IP Address
ID & Password
(for logging in GV-GV-IP Decoder Box
/ GV-Pad from GV-IP Device Utility)
ID & Password
(for connecting GV-IP Decoder Box /
GV-Padand GV IP devices)
Randomly assigned by the DHCP
server
admin / admin
admin / admin
Setting Up the Network