Quick Start Guide
Note:
For these changes to be applied through the GV-NVR System Lite, it is
required that the GV-IPCAM H.264 uses the
default username
and
password
that are
admin
. To modify the username and password, you can select
Change
Setting.
1. On the main screen, click the
Configure
button, select
General Setting
, select
Camera / Audio Install
, and click
IP Camera Install
. This dialog box appears.
2. Check
Install IP Camera
, select the number of IP cameras you want to link to,
and click
Configure
. This dialog box appears.
3. Click
Scan Camera
to detect all the IP cameras on the same LAN. After the
scanning process is finished, this dialog box appears.
4. Double-click the IP cameras to add them to the list.
5. Click the listed camera, and select
Change preview codec
,
Change record
codec
or
Change record resolution
to change the Live View codec or
Recording codec and recording resolution.
6. Click the listed camera, and select
Display position
to map the IP camera to a
channel on the GV-NVR System Lite.
7. The Status column now should display “Connected”. Click
OK
to exit.
