Getting Started
33
2
3. Fill out the following camera information.
Custom Name:
Type a personalized name for the device.
IP Address:
Type the IP address of the device.
Port:
Change the port number if needed. The default port is 10000.
Loop Time Interval:
Specify a time interval, ranging from 10 ~ 600 seconds, for the
device to display before switching to the next one. The default value is 30 seconds.
Login Information:
Type the ID and password of the IP device if needed. The
default ID and Passwords are
admin
.
Camera Index:
Number the IP device for searching convenience.
Protocol:
For GV-IP Devices, select
Geovision
as the protocol. For third-party
devices, select
ONVIF
or one of the
RTSP
protocols.
RTSP Command:
Type the RTSP link if you are connecting to the device through
RTSP protocols.
4. Click
Save
. The IP device is now added to the camera list.
Note:
All the GeoVision IP devices have the default user name and password of
admin
. If
you want to change the default settings, you may change the user name and password
under
Camera
in System Settings (see
4.6 Camera)
.