
4.
Optionally connect a monitor using a Video Out wire. Enable this
function by selecting your signal format at the TV Out field on the Web
interface. See
4.1.1 Video Settings
,
GV-IPCam H.264 Firmware
Manual
.
5.
Optionally connect to input / output devices or an infrared illuminator.
For details, see
1.5.2 Infrared Illuminator
and
1.6 I/O Terminal Block
.
6.
Connect power using one of the following methods:
plugging the power adapter to the power port.
using the Power over Ethernet (PoE) function and the power will
be provided over the network cable.
7.
The status LED of the camera will be on.
8.
You are ready to access the live view, adjust the image clarity and
configure the basics. See
Getting Started
, Chapter 19,
GV-IPCam
H.264 Firmware Manual
.
Note:
For details on limitations and requirements of the mini USB port,
refer to the
Note for USB Storage and WiFi Adapter
at the beginning of
this manual.
18
Содержание GV-BX120D series
Страница 10: ......
Страница 52: ...4 You are ready to access the live view 42...