3.4 Installation
You can install the camera to the ceiling or wall. Follow the steps below.
1.
Optionally insert a micro SD card to the camera.
A. Unscrew and open the back panel with the supplied torx wrench.
Figure 3-2
B. Insert a micro SD card (SD/SDHC, version 2.0 only, Class 10)
into the card slot and replace the silica gel bag (see Figure 3-1).
IMPORTANT:
1. The silica gel loses its effectiveness when the dry camera is
opened. To keep the interior dry, replace the silica gel bag
every time you open the camera and conceal the gel bag in
the camera within two minutes of exposing to the open air.
2. Make sure the I/O connector is firmly plugged.
C. Secure the back cover with the supplied torx wrench.
56
Содержание GV-BL120D
Страница 16: ... Smart Phone and 3GPP support 31 languages on Web interface ONVIF Profile S conformant 14 ...
Страница 24: ...GV Relay V2 Bullet Camera COM Ground Yellow DO1 Digital Out Orange 22 ...
Страница 28: ...2 Adjust the angle of camera base and fasten the base fixing screw 0 360 Figure 1 16 26 ...