GeoRef V2 Series Hardware Operating Instructions
30
Using the Electronic Compass
1.
Find the
Compass
icon
in the
Control Panel
interface, as shown below left.
2.
Double tap the
Compass
icon, the compass interface appears, as shown below right.
The electronic compass is able to provide the accurate direction for user even with pool
satellite signals, and in low-speed or static status.
Restoring WinCE System
Make sure the backup of software and data have been done before restoring WinCE system.
In the power off status, keep pressing the “ENT” button and press the power button, then
the handheld will turn on and the interface of “Restoring the system, please wait…” will be
shown as below.
This operation will restore all data and settings to the initial status of handheld except
Micro SD. Please note: the software gPac will be deleted. Reinstallation is required to
perform any field work. Please refer to the
gPac User’s Manual
for reinstallation.
Содержание GeoRef V2E
Страница 2: ......
Страница 4: ......
Страница 45: ...39 Troubleshooting Common Troubleshooting ActiveSync Common Problems C H AP T E R 6...
