GEOSUN GeoPro K2E, Инструкция по эксплуатации оборудования

Страница: 19 / 43

Basic Operations
15
Power Management
Installing and Removing the Battery
1. Insert the raised parts of battery into the corresponding slot.
2. Press down the end with plastic spring of the battery until you hear the sound of lock.
3. To remove the battery, pull up the plastic spring of the battery until you hear the sound of
popup, and then gently take out the battery.
Note: The battery life will be reduced with temperature decreasing and charge times
increasing. Typically, a new 4200 mAh battery can support continuous work for about 8
hours. The working time may be different depending on the communication configuration,
the status of screen backlighting, etc.