Geospace GSB, Руководство пользователя, Страница: 15 / 27

GSB User Manual
GSB User Manual (593-01940-01 Rev C) release date: TBD Page 15 of 27
4.3 –GSB LED flash codes
GCL/GSB Deployed Codes:

GPS on but no GPS fix: One LED flash per second.

GPS on with GPS fix : Two quick flashes once per second.

Recording with GPS off : One quick flash every 8 seconds.

Sleeping or Disabled: Two quick flashes every 10 seconds.

Running geophone tests: LED flashes rapidly 5 times a second.

Ready to deploy : The LED flashes for one second on followed by one
second off pattern.

SOS Pattern : LED flashes 3 times followed by 3 short flashes, the
sequence starts when the device receives a “searching for lost device”
command and continues while radio communication is valid.
Start-up Error Codes:

Critical GSR Error: LED flashes repeatedly on solid for 1 second
followed by off for one second.

Critical Geophone 1 Error: LED on solid for 1 second followed by 1
short pulse.

Critical Geophone 2 Error: LED on solid for 1 second followed by 2
short pulses.

Critical Geophone 3 Error: LED on solid for 1 second followed by 3
short pulses.

Critical Geophone 4 Error : LED on solid for 1 second followed by 4
short pulses.

Critical Battery Error: LED on solid for 1 second followed by 5 short
pulses.

Flash Error: LED on solid for 1 second followed by 6 short pulses.

Flash Almost Full: LED on solid for 1 second followed by 7 short
pulses.
GCL/GSB Ethernet Codes (in DCR)

Connected: LED flashes once every 2 seconds.

Erasing Flash: LED flashes on solid for 0.5 seconds followed by off for
0.5 seconds.

Charging: LED flash on for one second and off for 1 second.

Prepared to enter ship mode: LED flashes rapidly 5 times a second.