GEOSOFT DENT ENDOEST-3D, Руководство пользователя

Страница: 17 / 48

17
ENDOEST-3D
hotline @ geosoft.ru
- Connect the open plug of the cable for the accumulator charging to
the PC USB-port .
Yellow light ( 8-fig.2) indicates that accumulator is being charged.
When the accumulator is fully charged, indicator goes down ( slight
lightning is possible ).
Note: Standard time for the accumulator charging is about 2,5 hours,
however, it depends on the accumulator current charge, level of its
wear, temperature.
Operation and charge time of the old accumulator is shorter than of a
new one. In the case of meaningful reduction of the device operation
duration you should address to the service department to replace the
old accumulator for a new one.
- Remove the charger plug from the mains socket and disconnect the
cable from the device and PC when the device is charged.
7.2 Indication of the accumulator discharge
When the accumulator charge is lower than minimally allowable
level (<20%), warning “
LB” indicator (7-fig.3) appears on the device
display.
Having seen such an indicator, charge the accumulator according to
the p.7.1.
Otherwise, when the accumulator charge falls to the critic level
(<10%), the device switches off automatically.
Attention! When discharged, charge the device power supply in time.
Exclude the accumulator full discharge.