Page 5
1. Connect the
ZEB Horizon
scanner to the datalogger using the main cable and power
on the system as normal.
2. Connect the camera to a PC as outlined in the
ZEB Vision User Guide
.
3.
Open
->
GeoSLAM Control Tool
Figure 2. GeoSLAM Control Tool.
4.
Select
->
Connect,
to open the Control Selection (Figure 3)
Figure 3. Control Selection.
5.
Select
->
ZEB Vision
.
6.
Select
->
OK
, to continue.
7.
Input
->
169.254.0.206
, at the IP address popup to detect the camera (Figure 4).
