GeoSIG AC-23, Руководство пользователя

Страница: 5 / 15

AC-23 Accelerometer User Manual
11.08.2022 / V17 5 / 15
GS_AC-23_UserManual_V17
2.2 Binder Serie 423
GeoSIG P/N #J_CIR.012.010.M
Binder Serie 423 P/N 99 5629 00 12
Figure 2, Binder Serie 423 connector
Cable gland nut has to be determined as per cable external diameter and must be separately ordered. It has
also to provide the cable shield connection to connector case.
2.3 Connector Pin Description
The connector pin assignment and cable colour code can be observed in the table below:
Binder Connector
SIGNAL Comment Colour
Serie
623
Serie
423
Pinout Pinout
1 A OUTPUT X (+)
0 V ± 10 V voltage output, 47

output impedance
White
2 B OUTPUT X (-)
0 V ± 10 V voltage output inverted, 47

output impedance
Brown
3 C OUTPUT Y (+)
0 V ± 10 V voltage output, 47

output impedance
Green
4 D OUTPUT Y (-)
0 V ± 10 V voltage output inverted, 47

output impedance
Yellow
5 E OUTPUT Z (+) 0 V ± 10 V voltage output, 47

output impedance Grey
6 F OUTPUT Z (-) 0 V ± 10 V voltage output inverted, 47

output impedance Pink
7 G TEST INPUT Test input, output will result in a sensor step response Blue
8 H GND
Connected to Recorder’s GND
Red
9 J +12 VDC power Power input, 10 to 15 VDC range, 90 mA @ 15 VDC Black
10 K GROUND Ground, not connected to mechanical ground Violet
11 L AUX Auxiliary input (reserved) Grey/Pink
12 M GROUND Ground, not connected to mechanical ground Red/Blue
Table 1. AC-2x Connector Pin Assignment and Cable Colour Code