As you unpack the
product, check contents.
Should there be any
damaged or missing
parts contact your
supplier immediately.
Assemble the gate
valve (A) which
connects the tank to the
reservoir, directly to the
reservoir as shown in
fig.1, ensuring that a
rubber seal is fitted to
both ends of the valve.
Screw the air regulator
and safety valve
assembly (B) to the
SPECIfICATION
ASSEMBLY
4
overall Height:
Tank Height:
Tank Width:
Maximum length:
Supply:
Operating Pressure:
Air Consumption:
Air Inlet Ø:
Weight:
Max. Working Capacity:
1040mm
180mm
485mm
775mm
Air
40-60psi
6cfm
1/4”
38kg
50ltr
4.1.
4.2.
4.3.
4.4.
4.5.
reservoir as shown in fig.2 ensuring that the rubber seal provided is in place.
Assemble the two upper tank support arms (C) into the sockets provided on the
tank but do not tighten the fittings yet.
Place the upper tank onto the support arms and lower it down until the tank outlet
drops into the top of the gate valve (A). Fix the tank to the valve by tightening ring
(Q) as shown in fig.4. Tighten the hex socket bolts at either end of the upper tank
supports (C). Fit handle into support arm brackets (C) and tighten.
Mount the cleaning brush in its stowage position on the underside of the lid over
to the left hand side. Feed the brush tube (T) through the hole in the right-hand
side of the tank and connect it to outlet (R) on the head of the regulator /safety
valve assembly.
