
5
You should have
Motor unit, blade unit,
2 bottles and 2 resealable lids
27. Do not overfill the bottles, only fill to the relevant maximum
markings on the bottle (600ml/20 Oz).
28. To prevent overheating, never allow the motor to run for
more than 1 minute at a time. Allow the appliance to cool
for at least 1 minute in between operation cycles and only
operate for a maximum of 3 consecutive cycles. After 3 cycles
allow the appliance to cool for 10 minutes before next use.
29. Rinse the blades under a tap straight after use to remove
debris. This will make it easier to clean properly a little later.
30. Plastic bottles and lids are dishwasher safe. Blades are not
dishwasher safe.
31. Please don’t dismantle. If a fault occurs, have the twist & go
blender inspected in a qualified repair shop or return to us
at ASDA.