George Home GJB401SS-20, Руководство пользователя

Страница: 8 / 12

8
CLEANING
1. Always switch the blender off at the mains socket and unplug before
dismantling and cleaning.
2.
Never wash any parts of the blender in a dishwasher.
3. Wipe the motor unit with a damp cloth, never immerse in water. Never allow
the motor unit, power cord or plug to get wet.
4. For easy cleaning you can partially fill the food jug with warm soapy water
and replace the lid and stopper. Now switch on the pulse mode to clean the
blades and the bottom of the food jug. Turn the pulse mode on several times
for a few seconds then remove the food jug and rinse out with warm running
water.
5. Leave the food jug upside down on a draining board to dry.
STORING
IMPORTANT: Never store the blender when it is still hot after being used.
Always allow it to cool completely then place it back in its box and store out of
the reach of children.
Changing the fuse
Only use a 3 amp fuse.
To change the fuse, place a screwdriver into
the recess of the plug cover and pull the
fuse holder upward until it’s free.
Slide the fuse out and pop in the
replacement.
Slot the fuse holder back into the recess
and push down until it locks into place.
GEORGE GJB401SS-20 Blender.indd 8 19/05/2020 11:38