George Home George Cot Top Changer, Инструкция по сборке и эксплуатации

Страница: 3 / 12

Before you start...
• The furniture you have purchased is produced from carefully selected
natural timbers. You may notice some variation in the grain and colour of
different component parts, which is normal for furniture produced using
natural wood. Even within the same tree, the colour of the timber will
vary depending on the age of the growth. Colour variation is a natural
characteristic of most timber products.
• This changer is suitable for use by infants from birth until approximately
12 months old.
• This changer top should only be used in conjunction with the appropriate
cot specified. Suitable for use with George Home Cot
(Spec code 17G.02.16.273) and George Home Cot & Toddler Bed
(Spec code 17G.02.16.458).
• We recommend that a changing mat should always be used. Approximate
dimensions L800 x W490mm.
• For details on how to maintain your product please see our 'How to....
look after your furniture' section.
• We suggest you spend some time reading this manual before following
the simple step-by-step assembly instructions.
• Check you have all of the components and tools listed in this manual
before you start.
• Make sure you have enough space to lay out the parts before starting.
• Do not discard any of the packaging until you have checked that you
have all parts and fittings listed. When discarding packaging take care
and consideration for others and the environment.
• When assembling this furniture be aware of the safety of yourself and
others.
• Some of the assembly will be easier with two people. Seek assistance
when lifting large or heavy items.
• Assemble your furniture on a clean, soft and level surface to avoid
damaging the floor or your product.
• Keep any tools provided or spare fittings for future use. Only use the
tools specified.
• Assemble all parts loosely, by hand, before tightening any bolts or fixings.
• Once built, do not dismantle for purposes of transportation or storage.
• This product conforms to BS EN 12221.
3