8
4.
Place the kettle onto the power base.
5.
Slot the plug into an electrical
socket and then turn the power on if
required.
The display will light and show the
current water temperature, ready to
use. After 1 minute of inactivity, the
kettle will go into standby mode-
press the button to wake the kettle
if needed.
6.
Select the temperature you wish to
use by pressing one of the five pre-set
temperature buttons. After 3 seconds
the kettle will begin to heat. The light
around the bottom of the kettle will
illuminate to let you know boiling has
begun. The display will show the live
temperature change.
Note:
You can change the water
temperature when the kettle is boiling
by pressing one of the other pre-set
temperature buttons. When heating
small quantities of water (e.g. 1-2
cups), the final temperature may
be slightly higher than the selected
option, particularly when using the
lower temperature options. The
display will show the live temperature
of the water. For accurate results
when heating to 40ºC or 60ºC, we
recommend to fill the kettle with at
least 3 cups of water.
WK8527CEHEK Digital Controlled Kettle.indd 8
01/07/2022 07:54