4
HOW TO USE
This product is for household use only.
GETTING STARTED
• Remove all packing material, any stickers, and the plastic band around the
power plug.
• Remove and save literature.
• Please visit www.prodprotect.com/georgeforeman to register your warranty.
BEFORE FIRST USE
1. Wash grill plate, drip tray, and base in warm
water and dish soap. Dry thoroughly. Do not
get the probe wet.
Note:
When using the grill for the first time, you
may notice smoke or a slight odor during the first
few minutes if there is still oil on the plates from
the manufacturing process. This is normal.
Caution: Control probe must always be
completely dry before use.
2. Place drip tray into base. (A)
3. Fit the grill plate onto the base. It only fits
with the curved end of the grill plate over the
curved indentation of the base. (B)
TO OPERATE
1. Insert control probe into probe socket (C) and
plug the cord into a standard electrical outlet.
2. Turn the heat setting to the desired setting.
See Cooking Guide for suggestions. The
signal light will come on to indicate the unit is
heating.
3. When the signal light goes out, the unit is
ready.
4. Signal light will cycle on and off during
cooking as the unit operates to maintain the
desired temperature.
Tips
• To avoid damaging the nonstick surface, do not use aerosol nonstick spray,
sharp utensils or cut food on the cooking surface of the unit. Use silicone, heat-
resistant rubber or wooden utensils.
Caution
• Because some countertop finishes are more affected by heat than others, use
care not to place grill on surfaces where heat may cause a problem.
• Grill surface is hot during use.
• Do not use the grill without the drip tray or base.
A
B
C
