Geonav 7 Wide Скачать руководство пользователя страница 21 | Manualshive

Страница: 21 / 92

background image

21

English

Depth contours

This function allows the user to select the display of depth
contours; the options available are:
5m:

display of contours only with depths up to 5 meters

10m:

display of contours only with depths up to 10 meters

20m:

display of contours only with depths up to 20 meters

ALL:

all depth contours displayed

Safety contours

This function allows the user to display the depth areas cor-
responding to the safety contour desired. The options avail-
able are:
OFF:

no depth area displayed

Other values: the areas with depths up to the value selected
are displayed in shades going from darker blue (for lower depths)
to lighter blue (for higher depths).

The areas whose depths are over the limit set, and therefore
navigable under safety conditions, will be displayed in white.
Dryline areas are always displayed in green.

NOTE: In NIGHT mode, the areas with depths over the limit set, and therefore
navigable under safety conditions, are displayed in black.

Displaying chart details

The display of spot soundings, landmarks and other chart
details can be selectively enabled or disabled from the SETUP,
SET CHART DETAIL menu.

Displaying light sectors

The display of light sectors can be enabled or disabled from
the Setup menu. Press

GOTO

to display the menu, select SETUP,

SET CHART DETAIL, then LIGHT SECTORS (ON/OFF/AUTO).

«
...
19
20
21
22
23
...
»

Содержание 7 Wide





























































































Отзывы:

Нет отзывов

Похожие инструкции для 7 Wide

Бренд: Pall Страницы: 51

Бренд: ZAMST Страницы: 21

Бренд: Farmi Forest Corporation Страницы: 32

Tablet1000 Series

Бренд: Hantek Страницы: 98

Бренд: IFM Страницы: 175

Бренд: IFM Страницы: 5

Бренд: J.P. SELECTA Страницы: 32

Бренд: Parkside Страницы: 95

Бренд: S.R.Smith Страницы: 8

Бренд: S.R.Smith Страницы: 23

NavBoard ZipFlip

Бренд: S&S Precision Страницы: 6

Бренд: Waters Страницы: 4

Бренд: Waterpik Страницы: 2

Бренд: H&S Страницы: 54

Бренд: Samson Страницы: 2

MCX-C15 - MusicCAST Network Audio Player

Бренд: Yamaha Страницы: 65

Бренд: Yamaha Страницы: 24

FUSION APOLLO MS-WB675

Бренд: Garmin Страницы: 18

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды