GEONAUTE WATCH CONO TRTL 500, Руководство пользователя

Страница: 4 / 6

17 16
When one of the elements flashes, press the START/STOP button to make the numbers
scroll until you reach the desired value.
Press
RECALL again to leave the setting mode.
•
When the alarm goes off, it sounds for 20 seconds.
Press on any button to stop the sounding.
3 Stopwatch mode
START/STOP : start/stop the stopwatch
RECALL : recall of intermediate times recorded
SPLIT/RESET : to record an intermediate time
MODE : go to the following mode
•
Display :
- Upper line: the current value of the stopwatch and, if needed, SPLIT
- Bottom line: LAP , the time for this lap
•
In this mode, the screen will display the letters STW in the middle of the screen
(flashing) when the stopwatch is functioning and STOP when it has stopped.
Once the stopwatch has stopped, the word STOP will appear to the left of the screen.
•
The stopwatch measures the intermediate times ( SPLIT , the time that has passed since
the start up to the given point in time) and the time for the lap ( LAP , the time that has pas-
sed since the last partial measurement of time up to the given point).
It measures and saves the first 10 measurements of intermediate time in memory.
•
Setting the time and date.
Press for a longer time (2s) on the RECALL button. The word SET and the number for the
hours will flash to indicate that you have entered the setting mode.
•
Press the SPLIT/RESET button repeatedly to change the parameter to be set, following
the sequence …Hour-minutes-seconds-year-month-day.
When one of the elements flashes, press the START/STOP button to reset the seconds
to 0 or make the numbers of the parameter scroll until you reach the desired value. Hold
the button down to set more rapidly
Press
RECALL again to leave the setting mode.
2 Daily Alarm Mode
START/STOP : activate/deactivate the alarm
RECALL : to enter the setting mode
SPLIT/RESET : inactive
MODE : go to the following mode
•
Display :
- Top line : Wake-up time
- Bottom line : Time
•
The symbol for the daily alarm will appear if the function is selected (see corresponding
chapter).
The
ALARM symbol will appear for several seconds upon arriving in this mode, and then
remain displayed on the top line.
•
On the bottom line, you will read the time displayed according to the setting, as seen in
the preceding chapter, in 12h or 24h mode.
On the top line, the alarm time will appear in the same format as that of the time, which
was set in the time date mode.
•
Press the START/STOP button to alternate between activating and deactivating the
alarm.
•
Set the alarm :
Press for a longer time (2s) on the RECALL button. The word SET and the number for the
alarm hours will indicate that you have entered the setting mode.
•
Press the SPLIT/RESET button repeatedly to change the parameter to be set, following
the sequence …Hour-minutes-...
AL
AM:12:00
00
AM:12:13
33
TIME
00:00’:00’’
97
00:00’:09’’
24
STW
LAP
SPLIT
[000]
RECALL
SLOW FAST
DÉPART 400 m 800 m 1200 m 1500 m
START
LAP 1 LAP 2 LAP 3 END : LAP 4
SPLIT 1
SPLIT 2
SPLIT 3
END : SPLIT 4