GEONAUTE PEDOMETER DISTA D300, Руководство пользователя

Страница: 19 / 20

Factory mode
This mode can be used to check the device in case of malfunction.
To launch the device's troubleshooting procedure:
1. Press and hold down the 3 MODE, SET and RESET buttons
simultaneously for 3 seconds
2. Verify that the device automatically and successively performs
the following 4 steps:
• All screen segments turn on for 2 seconds
• The screen displays the number "802" on the top line and the
version number "x.x" on the bottom line for 2 seconds
• The screen sequentially displays across the whole screen the
number 0, "00 00 00" on the top line and "00 00" on the bottom
line for 2 seconds
• The device repeats the previous step for numbers 1 to 9
3. The device returns to HOUR mode automatically at the end of
the procedure.
To exit factory mode during the checking procedure, press on any
button or remove the battery.
36