5/11
5
EN
Calibrating atmospheric pressure at sea level
The watch uses the same sensor to measure altitude and atmospheric pressure. Thus it
cannot determine whether atmospheric pressure is shifting due to a change in altitude or a
change in weather condition.
You will need to calibrate the barometer or altimeter.
Press and hold
D
until [
SET CURRENT WEATHER
] appears on the screen. The weather
symbol will begin to blink.
Press
A
(+) or
B
() to increase or decrease the value displayed based on current weather
conditions.
Press
C
. The value for the sea level pressure will blink.
Press
A
(+) or
B
() to increase or decrease the value displayed based on, for example,
offi cial weather forecasts.
Press
D
to exit the settings mode. If calibration is not performed after 23 minutes, the
screen will stop blinking and return to barometer mode.
Temperature
Your body temperature may affect the value displayed by the watch. To obtain a
more precise measurement of the external temperature, place the watch on a
roomtemperature surface and wait 10 minutes.
To change the temperature unit displayed (°C or °F), press and hold
A
(for 3 sec).
Weather forecast
The icons displayed indicate local weather trends for the next few hours.
Sunny
Weather forecast icon
Cloudy
Rainy
Sunny with periods
of clouds
The watch's forecasts are only an approximation. If you are planning a major
hazardous outing (e.g., at sea or in the mountains), verify the watch's forecast by
contacting your local weather station. Weather conditions can change rapidly at sea
and in the mountains, creating lifethreatening risks. Use extreme caution.
