Geometrics G-858 Скачать руководство пользователя страница 74

Страница: 74 / 108

G-858BP Backpack Mag

Operators Manual

Chapter 7: Base Station

In base station mode, the unit will not keep track of changes in position. This is most useful when

the unit is being used to collect data for diurnal correction of another, roving, unit’s data. This procedure is
accomplished in the post-processing of your data, using the MagMap2000 program. See Chapter 4 for
more details.

In addition, this mode supports a real-time transfer of data out of the RS-232. This is useful if you

are using another PC to collect and process the data. Of course, you may also store the data inside the G-
858BP, with or without real-time transfer.

Setting up a Base Station Survey

From the main menu, select BASE STATION. The base station main menu will appear:

--- BASE STATION MAIN MENU ---

File < 1 > MAG EMPTY

Read Mode: < TIMED >

Store Mode: < STORE & TRANSFER TO PC >

Baud rate < 9600 >

Cycle Time: [ 0.2 ] s

START NEW SURVEY

10:40:10 02/18/95 Memory Free 86.6%

Base Station Main Menu

Scroll to an empty file, or select the base station file you wish to append data to. The fields are as

follows:

Read Mode.

May be set to TIMED or TRIGGERED. In TIMED mode, data will be read at timed intervals, set by

the cycle time field in this menu. In trigger mode, data will be read and stored by pressing the MARK key.

Store Mode

May be set to STORE IN MEMORY ONLY, STORE AND TRANSFER TO PC, or TRANSFER

ONLY. Transferring data means sending it out the serial port as it is being collected. Storing means
storing the data in the on-board memory.

**NOTE: If the STORE IN MEMORY AND TRANSFER option is selected, then when the memory if

full, after 5 or 6 hours the magnetometer WILL STOP TRANSFERING DATA. For this reason, if long
term unattended base station use is considered, w

e strongly suggest you use the TRANSFER ONLY

setting.

Then the magnetometer will continue to take readings and transmit them as long as there is battery power.

Baud rate

This field is shown only if transferring to PC was selected in the above field.

Cycle Time

Содержание G-858













































































































Результаты поиска

Содержание G-858

Отзывы:

Похожие инструкции для G-858

Бренды по названию

Популярные бренды

Geometrics G-858, Руководство по эксплуатации

Результаты поиска

Содержание G-858

Отзывы:

Похожие инструкции для G-858

Бренды по названию

Популярные бренды