IT IS VERY IMPORTANT
TO READ THESE INSTRUCTIONS
THOROUGHLY
BEFORE LIGHTING
THE STOVE
Thc knob for ignition and power control is located on the lower right hand side of the
stove.
If the flame Supervision Devise Actuating Flame (the Pilot Light) is extinguished
either
by intention
or not, no attempt should be made to relight until 3
minutes have elapsed.
(i) Igniting the permanent pilot light
1
Depress control knob fully
.
2
Whilst depressed, turn knob sharply 90 degrees anticlockwise to 'PILOT'
setting
Repeat until pilot light is visibly lit, this may take several attempts.
2
With control knob at 'PILOT'
setting, turn in an anti clockwise direction to 'LOW'
setting.
Important:
Immcdiately
after lighting, the stove must be left on a maximum setting for
fivc minutes in order to warm up the chimney.
2
Output
can be increased, by turning the control knob progressively in a clockwise
direction until the desired level is achieved, up to a maximum as shown by the
'HIGH'
symbol on the control pancl
.
1
From any hcat setting, depress control knob fully and turn clockwise to 'PILOT'
position
.
(v)
Extinguishing the stove fully
1
from any heat setting or the permanent
pilot, depress control knob fully and turn
c
lockwise to 'OFf'
position
.
57766
