Geomagic Geomagic Phantom Premium 1.56DOF, Руководство по эксплуатации устройства

Страница: 13 / 42

Premium 1.56DOF/1.5HF6DOF Device Guide 1-3
2 I
NSTALLING THE
P
HANTOM
P
REMIUM
D
EVICE
Run Phantom Test to Verify Setup
e Leave the Gimbal and base motor switches in the "On" position for normal
operation. These switches can be used to cut off motor power for debugging
purposes.
3 Position the Phantom Premium device.
Run Phantom Test to Verify Setup
In this section you will run the Phantom Test application to confirm that the device is
properly connected and installed.
1 Select Start>All Programs>Sensable>Phantom Test .
2 Put the Phantom in neutral position. Neutral position is described as when the 4 rotary
joints are lined up. See "Appendix D: Maximizing Positioning Accuracy" for more
information about position accuracy.
3 You can press the space bar on your keyboard to reset.
IMPORTANT
Geomagic uses only Parallel Port components that exceed the
IEEE
1284 EPP implementation recommendations. Geomagic is not
responsible for any damage that may result from using 3rd party
cables.