background image

7

POWER INPUT – VOLTAGE SELECTOR SWITCHES

 - The SHUTTLE MAX 6.0 utilizes a selectable universal 

power supply that operates from 100V to 240 volts, 50 to 60 Hz for worldwide use. A rear panel voltage selector 

switch is provided.  Simply set the voltage selector switch to the appropriate AC mains voltage (BEFORE connecting 

to the power source).  

Utilize the proper IEC cord-set appropriate for the country the product is being used. 

For countries using 100V, 110V, 115V and 120V AC mains, select both voltage selector switch to the 115V position. 

For countries using 220V, 230V, and 240V AC mains, select the voltage selector switch to the 230V position. 

There is no externally accessible AC mains (line) fuse. The internal fuse is integral to the SMPS power supply and is 

not user serviceable. This fuse will not fail except under very unlikely fault conditions to the SMPS, and if this occurs 

a qualified service technician is required to correct the problem.

CHASSIS DESIGN

 – The SHUTTLE MAX’S ULTRA LIGHT DESIGN utilizes the highest quality aircraft grade, 

computer machined aluminum chassis. To clean the amplifier, nothing more than a damp cloth and a little bit of glass 

cleaner (like Windex™) should be used. 

RACK MOUNTING

 

– The SHUTTLE MAX is designed to 

be rack mounted in a standard EIA style 19” equipment rack 

or tour-case. An optional rack mounting kit is available from 

your dealer.  The part number is: STL-MAX-RK.

GIG-BAG

 – A custom padded carry bag with shoulder strap is available 

as an optional accessory from your dealer.  The part number is: STL-MAX-

BAG. Do not operate the amplifier inside the carry bag, as the chassis 

aluminum construction and cooling fan inlet vents are part of the amplifier’s 

cooling mechanism.

SHUTTLE MAX MOUNTING SADDLE

 

– We have designed 

a heavy-duty aluminum saddle for the SHUTTLE MAX chassis so that 

the amplifier can be mounted directly to your speaker cabinet.  The 

model number for this is: STL-MAX-SDL.  The saddle is screwed to 

the desired speaker cabinet and then the SHUTTLE MAX amp can be 

mounted and removed easily from the saddle.

Accessories:

Содержание SHUTTLE MAX 6











Отзывы: