WARNING!
•
The use and operation of this device constitutes an agreement of full release of any and all liability
connected with its use. Only persons familiar with the operation of high-powered audio equipment should
attempt to operate this device.
•
In addition, by use of this device, the user agrees to hold Genz Benz Enclosures, Inc. and it’s designer
sales agents and all other affiliates and related parties harmless in the event of any accident, injury,
damage or loss resulting from such use.
•
Manufacturer’s sole responsibility is to provide a warranty on the specified performance of the product
under normal operating conditions for a period of 3 years.
•
All warranty service must be performed by a Genz Benz authorized service center.
•
Before returning any unit for service, a returned merchandise authorization number (RMA#) must be
obtained by calling 480-941-0705.
WARRANTY:
•
Genz Benz, Inc. warrants the model Shenandoah™ Acoustic 150LT to be free from defects in
materials and workmanship for a period of 3 years from the date of purchase, when purchased from an
authorized Genz Benz dealer.
•
This warranty does not cover normal wear and tear incurred from the normally designed use of the product.
•
This warranty is effective only if a copy of the original sales receipt is presented at the time of warranty
service
•
This limited warranty is completely transferable to any subsequent buyer as long as the original sales
receipt is also transferred to such subsequent buyer.
SHENANDOAH™ ACOUSTIC 150LT
ENGINEERING SPECIFICATIONS
INPUTS
XLR Balanced input impedance:
2.2 k ohms
XLR Balanced input sensitivity:
-60 to –30 dBV
¼” Unbalanced input impedance:
150 k ohms
¼” Unbalanced input sensitivity:
-30 to +4 dBV
AMPLIFIER OUTPUT
Power at 8 ohm load:
150 watts RMS
Power at 4 ohm load:
200 watts RMS
THD + N (preamp):
<0.02%
THD + N (power amp):
<0.05%
Frequency response:
20 Hz – 20 kHz +/- 1dB
CHANNEL EQUALIZATION
Low frequency:
125 Hz shelving, +/-15dB
Mid frequency (sweep):
250 Hz – 5 kHz , peaking, +/-12dB
High frequency:
8 kHz shelving, +/-15dB
DIRECT OUTPUTS
XLR balanced output level:
-30 dBV nominal
XLR balanced output impedance:
150 ohms
¼” unbalanced output level:
+4 dBv nominal
¼” unbalanced output impedance:
1 k ohm
