background image

Battery

  

BATTERY

 CHARGING

 

The 

battery 

can be charged 

while it is connected to your E-Bike or you 

can remove the battery for charging.

To charge the battery while it is in the E-Bike, remove the rubber cover 
to expose the battery charging port on the right side of the downtube.

The battery is the single most complex and expensive part of your E-
Bike.  Properly maintaining the battery state of charge is a very important 
part of owning an electric bicycle.

To charge the battery:

1)

With the battery on or off the bike, place the charger 

on

 a flat

 surface in a

 secure location

, uncovered, away from sunlight and debris

.

2) Inspect

 the charger cables, charger and battery for damage before beginning each charge.

3) Plug the DC charger into the wall socket
4)

C

onnect the DC output plug from the charger to the charging port on the side of the battery pack.

5) Observe the chargine light on the DC charger.  

While charging, the LED light on the charger will remain red in color.  

During charging, the

charger may become warm to the touch.

 

Charging normally takes 6~9hours, however it may take longer when you first receive the bike as the 

battery pack is balancing.

  

Once the charge cycle has completed, the LED light will turn green indicating that battery 

charging is completed

.

6) Disconnect the battery from the DC charger.  Unplug the DC charger from the wall socket.

Th

e

 battery must maintain 

a state 

of charge at all times.  

The battery should be recharged after each use. There is no memory effect, so you 

can charge the battery after short rides without damage.  

If the battery 

state of 

charge drops too low, the battery will become non

-f

unctional.

  

Failure to maintain the battery state of charge will not be covered under any warranty that may otherwise apply.

The battery state of charge must be maintained at all times.  If the battery state of charge drops too low, the 

battery cannot be recharged.  

Do not expose battery to sources of high heat or liquids.  Catastrophic failure 

of the battery may occur and subsequently cause injury or death.

WARNING

2

5

Содержание XS 750F




































Отзывы: