Genuine Scooter Company Roughhouse R50, Руководство пользователя

Страница: 17 / 38

20
INSPECTION BEFORE RIDING:
PLEASE DO THE INSPECTION AS FOLLOWS BEFORE RIDING-
ITEM PROCEDURE PAGE
FRONT BRAKE CHECK THE BRAKE FUNCTION, CLEARANCE, BRAKE OIL LEVEL,
SEE IF IT’S LEAKING. IF NECESSARY, MAY REFILL FMVSS DOT 3 OR
SAEJ 1703 BRAKE OIL.
16
BEAR BRAKE CHECK THE BRAKE FUNCTION AND CLEARANCE.
MAKE ADJUSTMENT IF NECESSARY.
16
THROTTLE GRIP CHECK IF IT IS SMOOTHE PUT SOME LUBRICANT & MAKE
ADJUSTMENT IF NECESSARY.
23
LUBRICANT ADJUSTMENTS IF NECESSARY.
CHECK THE OIL LEVEL/ACCORDING TO THE NEED, REFILL OIL.
23
TIRE CHECK THE PRESSURE THE WORN-OUT SITUATION. 24
CONTROLLER
/GAUGE CABLE CHECK IF SMOOTH ORERATION. ADD LUBRICANT IF
NECESSART.
-
CENTRAL STAND CHECK IF SMOOTH. ADD LUBRICANT IF NECESSARY. -
ASSEMBLY/
FASTEN FITS CHECK ALL THE ASSEMBLING PARTS. FIXING & ADJUST-ING
IF NECESSARY.
-
FUEL TANK CHECK THE FUEL LEVEL. REFILL UP IF NECESSARY. 17
LAMP/SIGNAL LIGHTS CHECK IF IT IS OPERATING AT GOOD CONDITION. 27
Perform a pre-ride inspection prior to every ride.
Pre-Ride Inspection
The front brake is a hydraulic disk type.
Inspect the brake system prior to each ride.
Properly functioning brake systems are vitally important to
your personal safety.
A brake lever that is not firm when engaged implies there is a
problem with the brake system. Do not drive your vehicle until the
problem has been fixed. Bring the vehicle to your authorized
Genuine dealer for repair.
Check for fluid leaks, fluid level, brake pad wear, and rotor
condition. Also check lever free-play frequently
.
Front Brake
Pull the brake lever lightly until you feel tension, then check
the lever free-play.
Front Brake lever free-play
：
10 – 20mm
WARNING
10 – 20mm
If the brake lever has no free-play or is too
loose, there is a potential brake system fault.
Inspect brake system thoroughly.
Front Brake Fluid
Check all joints along the brake hose for any brake fluid
leaking from the joint or the brake cylinder. Leakage has
occured if you see wet or oxidized fluid sludge.
Check brake fluid port to see brake fluid level; add brake
fluid if necessary.
Brake fluid specification: DOT4
Contact your authorized Genuine dealer immediately to repair
any brake fluid leaks. A leak could result in losing all hydraulic
pressure to your system rendering the brake useless.
WARNING
1 6