Hybrid Coupler Installation and Operations Manual Page 1
Technical or Setup Assistance
Telephone: 800.945.7730 (USA) or 801.975.7200 (worldwide) • Worldwide Web @ http://www.gentner.com
Congratulations on purchasing the Hybrid Coupler. The Hybrid Coupler is a
two-way passive telephone coupler that allows the operator to simultaneously
send and receive audio over a single telephone line. The unit connects directly
to the telephone line and can be used with almost any analog or digital
telephone system.
This manual explains how to install, set up and operate the Hybrid Coupler in a
step-by-step format. It also supplies instructions on how to resolve technical
problems, should any arise.
If you need any additional information on how to install, set up or operate your
system, please contact us at Gentner Communications at the location noted
below. We welcome and encourage your comments so we can continue to
improve our products and serve your needs.
Gentner Communications Corporation
1825 Research Way
Salt Lake City, UT 84119
TEL: Worldwide 801.975.7200 In U.S.A. 800.945.7730
FAX: Worldwide 801.977.0087 In U.S.A. 800.933.5107
FAX-On-Demand 24-Hour Information Service 800.695.8110
FAX-On-Demand International Line 801.974.3661
Worldwide Web Page @ http:\\www.gentner.com
Warranty Registration
Please register your Hybrid Coupler by completing the self-addressed,
postage prepaid warranty registration card and return it to Gentner
Communications by mail. You may also FAX it to the above listed fax
number or call Gentner Communications. When your product is properly
registered, Gentner Communications will be able to serve you better should
you require technical assistance or desire to receive upgrades, new product
information, etc.
Ensure that the following items (See Figure 1, below.) were received with your
shipment:
Introduction
SHIPPING NOTE:
Gentner Communications is not responsible for product damage incurred during
shipment. You must make claims directly with the carrier. Inspect your shipment
carefully for obvious signs of damage. If the shipment appears to be damaged,
retain the original boxes and packing material for inspection by the carrier.
Contact your carrier immediately.
Unpacking
Figure 1. Equipment diagram
