TECHNICAL SUPPORT:
1.800.283.5936 (USA) OR 1.801.974.3760
OPERATION •
ISDN CONFIGURATION
52
Network Type
Select this option to choose the network type assigned by your ISDN
network provider. The network type assigned depends on your
geographical location.
N. ISDN 1
(default)
NTT Japan
ETSI
ITR6
VN4
Australia
Custom
United States and Canada (also known as NI 1)
Japan
European; parts of France, most Asian countries, and
Australia (if using an On-ramp connection)
Germany
France
Micronet connections
United States and Canada
Switch Vendor
Select this option to choose the switch vendor assigned by your ISDN
network provider. The switch vendor assigned depends on your
geographical location and network switching.
AT&T
(default)
Nor. Telecom
Siemens
Unknown
United States and Canada (4ESS, 5ESS)
United States and Canada (DMS 100)
United States and Canada
All countries except US and Canada
Advanced ISDN
This option is reserved for factory testing and special applications.
Contact Gentner Communications Technical Support for additional
information, if required.
Terminate Line
Factory default is No. This option is reserved for factory testing and
special applications.
Emulate Switch
Factory default is No. This option is reserved for factory testing and
special applications.
NOTE: If Emulate Switch is
set to YES, you will not be
able to place or receive
calls on your ISDN lines.
✍
NOTE: You must reset or
restart the APV200-IP to
enable any changes.
✍