Gentner AP IR, Руководство пользователя

Страница: 14 / 19

P RO G R A M M I N G •
VOLUME
T E CH N I C A L S U P P O RT: 1.800.283.5936 (USA) OR 1.801.974.3760
14
To Program Volume
There are ten locations for storing volume control commands. All vol-
ume control commands stored are performed when the VOLUME UP or
VOLUME DOWN button is pressed. To change the nominal level to
negative, enter an asterisk before the value.
Example: (*10) = -10 and (10) = +10.
Press and hold the PROG. button until both LEDs in the receiver flash.
Press the VOLUME UP button
Select a location for volume control (0-9).
Select the device type (0=device connected to, 1=AP800, 2=AP10,
3=AP400, *=all devices).
Select the device ID (0-7, *=all units).
Select channel for volume control (*, 01-08, 11-15) See table to the left:
Select 4 for input or 6 for output.
Select nominal level (*=negative nominal level, 00-20)
To erase a preprogrammed location, press PROG., VOLUME UP, loca-
tion (0-9), VOLUME DOWN.
Examples:
Adjust volume of all output D with nominal level of 0 on all units and
store it in location 0 (default).
Adjust volume of Mic 1 with nominal level of -12 on AP400 # 1 and store
it in location 2.
Location Device Type Device ID Channel Input/Output
Nominal Level
Location Device Type Device ID Channel Input/Output
Nominal Level
* All Mics
01 Channel 1
02 Channel 2
03 Channel 3
04 Channel 4
05 Channel 5
06 Channel 6
07 Channel 7
08 Channel 8
11 Channel A
12 Channel B
13 Channel C
14 Channel D
15 Channel T