19
3
EN
Rev. 01 - 05/2013 - Cod. CM31710 - Instruction manual
Compressor Mod. C330
32. ExTRAORDINARY MAINTENANCE
All activities carried out to ensure use and operation of the appliance, via various intervention types (regulation, valve
checks, cleaning of air ilters, etc.) executed by the Manufacturer’s technicians according to preestablished time intervals
and in the instance of faults or wear and tear.
in tHE inStanCE oF EXtRaoRDinaRY MaintEnanCE, tECHniCal aSSiSStanCE PRoViDED BY tHE Ma-
nUFaCtURER oR tHE aUtHoRiSED SUPPliER MUSt BE REQUEStED.
33. END OF SERVICE LIFE
When disposing of the appliance, current legislation in force must be considered.
Dispose of the various component materials separately (plastic, copper, iron, etc.).
34. REPLACEMENT PARTS
in tHE inStanCE oF EXtRaoRDinaRY MaintEnanCE, tECHniCal aSSiSStanCE PRoViDED BY tHE Ma-
nUFaCtURER oR tHE aUtHoRiSED SUPPliER MUSt BE REQUEStED.
USinG UnoRiGinal REPlaCEMEnt PaRtS iS FoRBiDDEn.
35. ANOMALIES - CAUSES - SOLUTIONS
The following table displays various scenarios which may occur when using the appliance.
aUtHoRiSED oPERatoRS MUSt onlY CaRRY oUt oPERationS FoR WHiCH tHEY aRE QUaliFiED (SEE
PaRaGRaPH 6) anD WitH tHE ConSEnt oF tHE SaFEtY ManaGER (WHERE tHE aPPlianCE iS USED in a
BUSinESS ContEXt).
ABNORMALITIES
CAUSE
SOLUTION
The appliance will not
start or it stops and will
not re-start.
No electrical supply.
•
Check that the “ON-OFF” switch
(3)
is in the “ON (I)” position.
•
Check that the electrical plug is functioning correctly and is
correctly plugged in.
•
Check that any extensions used and the plug are functioning
correctly.
•
Check that the electrical main switch is functioning and in
the “ON” position.
Intervention of thermal
reset owing to voltage over-
load and/or a short-circuit.
•
Carry out the procedure described in Paragraph 28.
