23
SERVICING
PF3000P
4.
If special decontamination procedures are required, take appropriate precautions
and place the respirator in a suitable sealed container.
5.
Otherwise clean the respirator as indicated on page 23 after every use.
SERVICING
Cleaning
Remove respirator from user’s head before cleaning.
WARNING
:
Never use pressurised air on any part of the respirator.
•
Before cleaning remove hood, brow pad, brow seal, crown pad, nape pad, nape
spacer, HEPA filter with cover along with the rechargeable battery. Insert
provided cleaning plugs as shown at Figure 20 - Figure 22
•
Do not turn the respirator upside down and fill any area or cavity with liquids.
•
For respirators with contamination, ensure that the face shield is down and
respirator is upright. If fitted, ensure hood drawstring is closed. Clean using a
clean cloth with a mild solution of a household liquid soap and water. For
ingrained dirt on the outside of the respirator (excluding visor), a nailbrush or
ultrasonic brush may be used. Dry the respirator with a clean lint free cloth - do
not use a heat source.
•
Wipe the inside & outside of the respirator.
PUREWIPE PR01110SP
cleaning
wipes are recommended for this purpose.
•
Do not immerse the respirator in water or any fluid.
•
Do not use organic solvents or abrasive cleaning agents on any part of the
respirator.
•
Disposal and cleaning of parts should be undertaken in accordance with local
health and safety, and environmental regulations.
•
If the respirator has been used in an area that has caused it to become
contaminated with a substance requiring special decontamination procedures,
observe the precautions described in the manufacturer's health and safety
information.
NOTE
: For further advice and support on fitting and cleaning procedures please
contact Customer Services.
