9
www.gentecaustralia.com.au
BUBBLER WITH SEPARATE PUSH BUTTON
TFT8020
1.
Allow a 32mm cut-out hole to fit the
push activated button mechanism. Drill a
3mm hole to fit the Anti-vandal pin. This
should be fixed to prevent movement of
the button.
2. The timed flow valve should be fitted to
the push button assembly to install the
bubbler outlet.
3. Adjust in the cartridge length to
suit the basin surface thickness.
(See Figure 3)
4. Fit the flexi hoses (not provided) to the
water inlet and outlet. Ensure the arrow
on the button body is aligned with the
water flow direction. (Pointing to the
water outlet).
5. To install the bubbler outlet allow a cut
out no greater than 38mm and connect
the flex hose from the valve.
•
Note:
Ensure the arrow in the valve
body is facing the connection to the
water Outlet.
*Regular service must be carried out on the product to avoid product failure.
Figure3
Figure1
Figure2
