11
Notes
*For optimum operational life water pressures between 150kPa and 450kPa are recommended
Scope of Use: GPURE Range
v
Installation is subject to the regulatory requirements of the plumbing
code of Australia associated to AS/NZS 3500.1 (Bubblers) and AS/NZS
3500.4 (Taps)
v
Inlet pressure: Maximum 500 kpa
v
Manufacturers recommended pressure: 350 kpa
v
Installation: Refer to manufacturer’s instructions for installation
v
Water quality: In line strainer (supplied) must be installed to ensure
water quality
v
Suitable for indoor and outdoor use: GPURE FLOSTOP & GPURE
BUBBLERS
v
Suitable for indoor use only: GPURE JETFLO, GPURE CLEANLINE,
GPURE NUGEN
v
Temperature recommendation:
P
Single temperature up to 50
ч
c
P
Dual temperature up to 80
ч
c
P
Minimum temperature: 5
ч
c
v
Material: Stainless Steel (316) / Stainless Steel (304)
v
Mounting: Wall, bench or in line installation
