Genovation, Inc.
16
MiniTermPro
2: Using MacroMaster9xx
Running MacroMaster9xx
To program the ASCII key codes or change the keypad properties, for the Mini-
Term9xx keypad, click on the following (assumes default installation directories):
Start >> Program Files (x86) >> Genovation >> MiniTermPro >> MacroMaster9xx
The top row of buttons access the major functions of the program. At the center
left of the screen are a series of gray squares that represent the keys on the
actual keypad hardware. To the right of this is a black grid of rectangles that hold
the data associated with each key on the keypad. Every time you select a new
gray keypad key, a new set of black grid cells is available for filling with keystroke
data. The bottom of the screen shows a rendition of a PC keyboard. This can be
used to place the data into the black boxes. You may also type the data in.
At this point there are no characters assigned to any of the keys, the Properties
assume their default values and MacroMaster9xx is not aware of the COM port to
which the keypad is attached (or perhaps which one of several you might be
referring to).
Содержание MiniTerm 905
Страница 1: ...GENOVATION MiniTermPro User Guide Release 7 80 Fall 2017...
Страница 2: ...Genovation Inc 2 MiniTermPro...
