GENMAX GM7250iEDC, Руководство пользователя

Страница: 15 / 34

14
STARTING UP THE GENERATOR
Select Boot Mode
:
a. Hand Starting: Pull the starting handle to start the generator.
b. One Button to Start: Press the one-click start button to start the generator.
c. Remote Start
:
Press the "START" button on the remote control to start the generator
.
6.
a.
b.
c.
Plug in after started
.
7.
Remote Control Pairing
1. Long press the start button for more than 5 seconds until the button red indicator is on;
2. Press any key on the remote control
;
3. The red indicator of the start button will blink two or three times and then turns off, Remote start pairing is
successful.
Tip: The remote control delivered with the generator has been paired successfully.
1. 2. 3.1 3.2
COMMON PROBLEMS WITH STARTING THE GENERATOR:
Start the generator to run normally without output ?
Check whether the green light of the GFCI socket is on
.
If the green light is not on, press the RESET button after the generator is started
to make the green light on.
Tip: When the generator is not started, the GFCI socket is in the protected state
and the "RESET" button cannot be pressed.