Page 2
GEN
LED
Acolyte
®
is a quality division of
GEN
LED Brands
™
| www.
GEN
LEDBrands.com/Acolyte |
GEN
LED
Acolyte
®
| Architectural Lighting Solutions
REV.24MAY2021
1. Use proper screws (screw size up to 1/4” or M6.5) to mount
one extension arm onto the wall.
2. Mount the other arm onto the wall. Make sure the distance (D) is
the same as the tiltable stands distance (D) on the fixture.
5. Secure the fixture on the pair of extension arms by fastening the screws in the tiltable stand to the extension arms.
(See Step 1-4 for reference)
3. Use L-Key (M4) to loosen the hex socket screws and adjust
the inner channels to the desired arm length. Then tighten
the screws to secure the inner channels.
4. Loosen the set screws and adjust the position of the tiltable
stand if it’s misaligned to the extension arms.
hex socket screws
set screws
Note: Mounting arms need to be installed with proper damping hardware in extreme vibration environments
A R M O R S E R I E S
E X T E N S I O N A R M I N S T A L L A T I O N G U I D E
Tech Support: (+1) 212 629 6830 *301
