Page 1
GEN
LED
Acolyte
®
is a quality division of
GEN
LED Brands
™
| www.
GEN
LEDBrands.com/Acolyte |
GEN
LED
Acolyte
®
| Architectural Lighting Solutions
A R M O R S E R I E S
A C M I N I I N S T A L L A T I O N G U I D E
1. Tilt the fixture top to one side and position the fixture at the
desired location.
3. Rotate the fixture in the opposite direction and fasten the
screws on the other side of the tiltable stand.
2. Secure the fixture in place by fastening the screws through the
screw holes on one side of the tiltable stand.
4. Connect input cable to the power supply. Daisy-chain the
connector on the opposite end to the next fixture if desired.
Max screw diameter
0.185” (4.7 mm)
Tiltable Stand
6-pin 120V AC + data connector to T-Connector
6-pin power + data connector
to additional fixture
AC MINI
Tech Support: (+1) 212 629 6830 *301
