English
8
3. Confirm your new password by entering new password again
4. Exit this menu.
5. Select any menu and press
OK
on the Remote Control.
6. Then
the
Enter Password
box will be displayed.
7. Unless you enter the correct password, you can not run any menu.
Note
: Default password is 0000
Warning
: Do not forget your password
2.4. Factory Default
If you want to return TVGo DVB-T31 to
factory default, select Factory Default and
press the
OK
key.
Then a warning message will be displayed.
To confirm, select
OK
.
Warning
: On selecting factory default you
will lose all of data and information, which
was previously installed.
2.5. Previous Channel Recall
Press
PR
key on the remote control to
move to the previous channel you watched.
2.6. TV & Radio Mode
While viewing a TV channel, press the
TV/RADIO
key on the remote control to
change between TV and Radio modes.
